• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Lume questions: why does my lume fade so quickly, and how should I compare it? · RWI-07822

Q
Joined
01/01/26
Messages
22
Thread starter

My watch's lume is bright for a few minutes and then barely visible. Is that normal? People post lume shots of different watches, but they all seem to use different charging and exposure, so I can't tell what's actually better.

Question record — RWI-07822
FieldScope
SubjectLume questions: why does my lume fade so quickly, and how should I compare it?
ExerciseDiscuss the stated question; distinguish sources, interpretations and unresolved points.
T
Joined
01/01/26
Messages
26

Clarifying question: how are you charging it? A few seconds under a warm indoor bulb gives a much weaker charge than daylight or a UV source. Many 'weak lume' reports turn out to be undercharging. Try a consistent charge, such as 30 seconds under a phone flashlight at a fixed distance, before judging.

P
Joined
01/01/26
Messages
28

A bright initial glow followed by a steep drop is normal for photoluminescent pigments. Afterglow fades fastest in the first minutes and then settles to a dim, long-lasting level that dark-adapted eyes can still read. The real question is whether it's readable after an hour in darkness, not how it looks right after charging.

R
Joined
01/01/26
Messages
24

Lume photos are close to useless for comparison unless exposure is fixed. Phones raise exposure automatically in the dark, so a dim watch can look as bright as a strong one. For a fair photo comparison: same charge method, same delay after charging, manual exposure, and both watches in the same frame.

B
Joined
01/01/26
Messages
27

Differences in pigment, applied area, thickness and colour can affect appearance. Keep those design differences separate from claims about quality and use matched conditions for any comparison.

You must log in or register to reply here. Log in